SearchallPrepressOne-colour pressesTwo-colour pressesFour- and five-colourPostpress
Monochrome printing machines in stock. Recycled, mainly maintenance service. The price includes delivery, installation and instruction
9.900,-EUR LOT
Year: 1994
Size: 36 x 52 cm
Colors: 1
Counter: –
Location: In stock
Condition: Completely overhauled, all tear-and-wear parts – replaced
Availability: Immediately
Description: • NP numbering and perforating unit – fully completed • Conventional dampening • BEIL – register system • Antistatic device on feeder • Quick action plate clamps • WEKO powder sprayer • Envelope feeder
Upon request
Location: On stock
Condition: Very good
Availability: Immediately
Description: • Size: 360 х 520 mm • One printing unit • Single sheet feeder • Heidelberg laser-slitted fountain blades and lever regulation • Conventional dampening system • Quick action plate clamps • Register system • Powder sprayer • Low pile delivery
Upon request
Year: 1990
Size: 520 x 740 mm
Colors: 2
Condition: Completely overhauled, all necessary tear-and-wear parts – replaced
Description: • Counter – 48 mio • Vacuum belts on feeding table inclusive vacuum side lays • Cardboard guiding device • ROLANDMATIC – alcohol dampening • EDELMANN – refrigeration, filtration and recirculation • BEIL – pin register system • Quick action plate clamps • SUPER BLUE in the delivery • NON-STOP in the delivery • Sheet Decurler • 4 grippers in the delivery • WEKO T6 – powder spray
Upon request
Year: 2000
Size: 480 x 660 mm
Counter: 38 million
Condition: technically serviced, inking and dampening rollers – recovered
Description:
• Perfector (2 + 0 / 1 + 1 • Semi-Automatic Plate Changing • Technotrans Recirculation • Cylinder Cocking • Electronic Sidelays • Electronic Double Sheet Control • Powder Sprayer
Upon request
Age: 1996
Colours: 2
Fully automatic perfector: 2+0 / 1+1 colors
Counter: 40 mio
Technical data: • Max. size without perfector (2+0): 720 х 520 mm • Min. size: without perfector (2+0): 350 х 257 mm, with perfector (1+1): 350 х 280 mm • Max. Printing area: without perfector (2+0): 710 x 510 mm, with perfector (1+1): 710 x 500 mm • Gripper area: 8-10 mm • Production speed: without perfector (2+0): from 4.000 to 12.000 sheets/hour, with perfector (1+1): from 4.000 to 10.000 sheets/hour • Material thickness: 0.04-0.4 mm • Print start: 45 mm • Pile height in the feeder: 830 mm (980 mm OP) • Pile height in the delivery: 800 mm (380 mm) • High pile dimensions: 4680 (L) x 2456 (B) x 1860 (H) mm • Weight: 8.000 kg • Power: 16.3 kW
Description: • Perfector: 2+0 / 1+1 • AUTOPLATE • COLOMATIC – dampening and recirculation • Auto Ink Roller Wash • Auto Blanket Wash • Auto Impression Cylinder Wash • Chromic cylinders • High pile delivery
Upon Request
Year: 2002
Size: 520 х 740 mm
Colors: 2
Perfector: 2+0 / 1+1 colors
Counter: 120 mio
Description: • OR – Register remote • ALCOLOR with cooling device • BALDWIN BALCONTROL – cooling, metering and recirculation • WEKO T6-N Plus Powder sprayer • Quick action clamps • Low pile delivery
Upon request
Location: In stock
Condition: Completely overhauled and retrofitted; all inking and dampening rollers, tear and wear parts and consumables – replaced.
Availability: Immediately
Technical data: • Max. web width: 60 mm • Min. web width: 560 mm • Cut-off length: 452 mm • Printing area width: 640 mm • Printing area length: 435 mm • Max. speed – size А4: 25 0000 circulations/hour • Max. speed – size А5: 20 0000 circulations/hour • Max. web diameter: 1200 mm • Web spool diameter: 70 – 74 mm
Description: • Reel stand • Web position control unit E+L (sideways) • Web tension control unit - INFEED • 2 pcs x double “blanket to blanket” printing units • Continuous alcohol dampening inclusive servo motors and servo drive for the dampening system • MGE – cooling, metering (IPA and water additive) and recirculation unit • Jaw folder with 2 folds, 8 pages A4 • Mobile device for third fold – size А5 • Plate bending device • Plate punch • Control console • Shingle belt delivery • Delivery press-stacker BALDWIN
Upon request
Location: In stock
Availability: Immediately
Technical specification: • Printing units 5 Units of Offset-Waterless • 1 Unit of Hot-Foil Stamping • Drying IST UV Cool Dryers after each Printing Unit (5 dyers • Rotary embossing unit • Die-cut Semi-Rotative Die-Cut on 14" Magnetic Cilinder • UNWIND Reel up to 1000mm diameter • REWIND Maximum Reel diameter 820mm • Second pass • Web width: 333mm • Press format: Max. width: 330 mm, Max. length: 304,8mm (REPEAT from 2 inch to 12 inch) • Hot-foil stamping: Max. width: 320mm, Max. length 280mm • Unwind and Rewind Shafts • Water / Oil Heat Exchanger • Slittering Rotary Knives at the end of the machine.
Plates: • Offset plate Waterless Offset Plates, TORAY or equivalent. Thickness 0,3mm • High Quality Printing, common 180 / 200 lpi (70 and 78 l/cm) • Hot stamping plate Magnesium Plate, thickness 1mm • Die-cut plate flexible die-cut, thickness 0,44mm.
Auxiliary: • Machine for rounding and fixing magnesium plate on hot stamping cylinder • Machine plate puncher • Machine for bending printing plates • Developing machine for printing plates.
7.000,-EUR
Year: 1990
Condition: Excellent – techniUpon requesty checked.
Technical description: • Cutting width: max. 610 mm • Cutting height: max. 100 mm • Cutting length: max. 610 mm • Cutting length: min. 25 mm • Cutting speed: 3.1 sec./cycle (19 rpm) • Backgauge Positioning Accuracy: +/- 0.1 mm • Job memory: 256 jobs (99 courses each) • Push-out length: 50 mm • Clamp: from 500 to 1 700 kg (variable) • Machine dimensions: 1.070 x 1.460 x 1.270 mm • Machine Weight: 694 kg
Year:
Size: 92 cm
Location:
Condition:
Availability:Description: • hydraulic system, air table • digital display • electronic programming unit with 99 programs • 2 side tables • 2 knives, documentation
Condition: Completely overhauled and retrofited.
size – 92 cm • new CNC control, type DNC 3.6 • positioning accuracy up to 0.01 mm • 100 programs, 100 steps each • colour touch screen 10.0” diagonally • new electrical equipment – Siemens, Schneider-electric • hydraulic system, grinded air able • 2 side air tables • US – photo-electric safety guards, highly protective • new DC drive motor, OIE and coupling
19.900,-EUR LOT
Year: –
Size: 115 cm
Location: In stock
Condition: Completely overhauled, fully electriUpon requesty retrofitted and updated
Availability: Immediately
Description: • hydraulic system, grinded air able • US – photo-electric safety guards • 2 side air tables • new CNC control, type DNC • positioning accuracy up to +/- 0.02 mm • 100 programs, 100 steps each • colour touch screen 10.0” diagonally • new electrical cabinet • 2 knives, manuals and tools
15.500,-EUR LOT
Condition: Cleaned and techniUpon requesty checked; all tear and wear parts – replaced.
Availability: On stock
Technical Description: • Min. size: 100 x 140 mm • Max. size: 300 x 420 mm • Min. thickness: 4 mm • Max. thickness: 70 mm • Capacity: from 20 to 50 cycles/min. • Infeed transport belt • Automatic pile feeder • 5 pcs. cutting plates • 5 pcs. pressing plates • 2 sets of knife cassette касети за смяна на резци • 3 set of cutting knives (9 pcs. in total) • Central lubrication • ydraulic system inclusive oil heater cooling • Transport delivery belt for finished products • Documentation, special tools.
Note: The equipment of the cutting plates and press plates includes plates for the whole size range from min. 100 x 140 mm to max. 300 x 420 mm.
22.000,-EUR LOT
Year: 1960
Size: 38 x 52 cm
Location: In stock
Condition: Completely overhauled, fully retrofitted and updated
Availability: Immediately
Description: • capacity 0 – 4000 cycles/h • one two-zone honeycomb heater plate, two temperature sensors and two temperature controllers • double foil pull device for two foils at a time • computer controlled programming device for individual pull of each mechanis • frequency control of main motor • mechanical pantograph for constant foil tension control • completely new electrical equipment
9.000,-EUR LOT
Year: –
Size: 46 x 58.5 cm
Location: In stock
Condition: Completely overhauled, all tear and wear parts and consumables – replaced
Availability: Immediately
Description: • Converted for die cutting • Capacity: up to 4 000 cycles/h • New electrical equipment of the main control cabinet • Frequency control of main motor • 3 frames, tools for machine fixture, documentation
Upon request
Location: In stock
Condition: Operational
Availability: Immediately
Technical description: • Max. paper size: 50 х 70 cm • Min. Paper size: 16 х 21 cm • Feed pile height: 265 mm • Delivery pile height: 320 mm • Frame inner size: 49 х 66 cm • Working length (from knife to knife): 46.5 х 66 c • Capacity: up to 3 600 cycles/hour /depending on the material • Material: from 20 to 600 g/m2 • Dimensions: 266 (L) х 163 (B) 153 (H) cm • Net weight: 3 400 kg • Power: 4 kW • Compressor: 1.1 kW
38.000,-EUR LOT
Size: max – 54 x 72 cm
min – 21 x 28 cm
Location: In stock
Condition: The basic machine has been completely overhauled, cleaned and refurbished.
The Hot Foil Stamping device is brand new.
Availability: Immediately
Description: • max. stamping size 51 x 69 cm • capacity 0 – 4000 cycles/h • one four-zone honeycomb heater plate consisting of 2 pieces, 4 temperature sensors and 4 temperature controllers • 2 (two) independent foil pull devices with high torque servomotor and invertor control • 2 computer controlled programming devices and invertors for individual pull of each mechanism new equipment of the electrical box • invertor on main motor • mechanical pantograph for continuous foil tension control • separate control console for hot-foil stamp mode
40.000,-EUR LOT
Year: 1960
Size: max – 54 x 72 cm
min – 21 x 28 cm
Location: In stock
Condition: The basic machine has been completely overhauled, cleaned and refurbished.
The Hot Foil Stamping device is brand new.
Availability: Immediately
Description: • max. stamping size 51 x 69 cm • capacity 0 – 4000 cycles/h • one four-zone honeycomb heater plate consisting of 2 pieces, 4 temperature sensors and 4 temperature controllers • 3 (three) independent foil pull devices with high torque servomotor and invertor control • 3 computer controlled programming devices and invertors for individual pull of each mechanism • new equipment of the electrical box • invertor on main motor • mechanical pantograph for continuous foil tension control • separate control console for hotfoil stamp mode
21.900,-EUR LOT
Size: 56 х 77 cm
Capacity: up to 4 500 cycles/hour
Converted for die-cutting (new die-cutting plate)
New electrical cabinet
Frequency control of the main motor
Equipped with a set of safety covers as per BDS
Description: • Die-cutting frames: 3 pcs. • Die-cutting plates: 2 pcs. • Oil tray: 1 pcs. • Lock/tools: 4 pcs.
21.900,-EUR LOT
Size: 56 х 77 cm
Capacity: up to 4 500 cycles/hour
Converted for die-cutting (new die-cutting plate)
New electrical cabinet
Frequency control of the main motor
Equipped with a set of safety covers as per BDS
Description: • Die-cutting frames: 2 pcs. • Die-cutting plates: 2 pcs. • Oil tray: 1 pcs. • Lock/tools: 4 pcs.
10.900,-EUR LOT
Year: 2006
Max. size: 650 х 350 mm
Min size: 70 х 55 mm
Location: In stock
Condition: Excellent condition and perfect working order, hardly used. Cleaned, checked and fully serviced
Availability: Immediately
Description: • Fold length: 20 to 330mm • Max. speed: 30 000 sheets/hour (A4 single fold) • For direct-mail or unique leaflet • Integral preset batch counter • 1st folding unit – 4 buckles • 2nd folding unit KTU-35 – knife, through buckle after knife
2.500,-EUR LOT
Year: 1982
Size: 72 x 102 cm
Location: In stock
Condition: Working condition
Availability: Immediately
Description: • GREMSER – pаlette feeder • first folding unit – 4 buckles • second unit – 4 buckles • third unit – 2 buckles • belt delivery • control console, counter, pump • anti-noise hoods on each folding section
17.900,-EUR LOT
Year: 1998
Size: 32 x 32 cm
Location: In stock
Condition: Completely overhauled, all tear and wear parts – replaced
Availability: Immediately
Description: • max. paper size – 320 x 320 x 40 mm • min. paper size – 75 х 75 x 0,5 mm • max. cover size – 640 x 324 mm • min. cover size – 220 x 140 mm • max cover thickness – 300 g/m2 • min. cover thickness – 100 g/m2 • 4 clamps • automatic cover-feeding and creasing • milling and roughening unit • spine gluing with hotmelt • side gluing with hotmelt • exhausting device for paper waste • exhausting device for glue fume • belt delivery • capacity up to 1100 cycles/ hour
Upon request
Year: 2015
Counter of VAC-1000: 4 834 pcs.
Counter of VAC-1000: 4 342 pcs.
Condition: Demo machine
Availability: Immediately
Equipment: • VAC-1000А + VAC-1000M – 2 pcs. towers with 10 bins each for suction-rotary feeding • SPF-200A – Stitching and folding unit with 2 pcs HOHNER-stitching head • FC-200A – Foredge Trimmer • LC-200 – Long conveyor • IFU-200 – Hand marrying unit for manual feeding for collated sets and thicker covers from critical materials • PJ-77 R – Paper jogger
Technical data: • Collating size: Max. size: 350 (W) x 500 (L) mm, Min. size: 148 (W) x 148 (L) mm • Stitching and Folding size: Max. size: 356 (W) x 508 (L) mm, Min. size: 120 (W) x 180 (L) mm • Collating paper weight: 52 – 208 g/m2 • Stitching and folding paper weight: Normal paper: 64 – 157 g/m2, Coated paper: 85 – 157 g/m2 • Max. pile height in VAC-100 tower bins: 55 mm • Stitch thickness: max. 4 mm (about 48 sheets of normal paper – 64 g/m2) • Fold thickness: max. 2 mm (about 24 sheets of normal paper – 64 g/m2 or 16 sheets of normal paper – 82 g/m2) • Stitch distance: 73 – 290 mm • Stitching heads: 2 pcs. HOHNER • Stitching wire: standard № 26 (0,5 mm) • Error sensors: sheet jam sensor, wire feeding sensor, jog sensor • Counters: total counter, batch counter • Max. speed: up to 4000 booklets/hour size А4-trimmed, up to 4500 booklets/hour size А5-trimmed • Max. untrimmed size: 356 (W) x 254 (L) mm • Min. untrimmed size: 120 (W) x 90 (L) mm • Max. trimmed size: 356 (W) x 250 (L) mm • Min. trimmed size: 120 (W) x 85 (L) mm • Trim width: 20 mm • Trim thickness: max. 4 mm • Trimming production speed: up to 4000 booklets / hour, size А4, up to 4500 booklets / hour, size А5 • Error sensors: sheet jam sensor, overload sensor, errored books reject tray • Counter
8.500,-EUR LOT
1.500,-EUR LOT
Year: –
Size: 35 x 27 cm
Location: In stock
Condition: Good technical condition
Availability: Immediately
1) Thread stitcher POLYGRAPH BREHMER, type 381-4E • normal stitch, shifted stitch, cross stitch • cold binding roller • max. size: 355 х 275 mm • min. size: 120 х 70 mm • capacity: max. 110 rpm/min
2) Automatic feeder ASTER HEADOP 38 with electromechanical programmer.
2.200,-EUR LOT
Description:
• STAHL SBP 46.2 – signature press stecker with vertical delivery.
1.850,-EUR LOT
Location: In stock
Condition: Good technical condition
Availability: Immediately
Description: • stitching of booklets and blocks • stitching wire thickness: 0.35-0.9 mm • maximal stitching thickness: 25 mm • staple crown length: 12 mm • stitching speed: 165-215 cycles/min.
1.950,-EUR LOT
Description:
• Equipment for longitudinal perforation – 2 systems • Equipment for cross numeration – 1 system • Equipment for longitudinal and cross numeration – 2 pcs. x disk holders with cams for numerators’ control • Vertical (barrel-shaped) numerators ATLANTIC ZEISSER – 3 pcs, lowering, 7 digits • Horizontal numerators ATLANTIC ZEISSER – 4 pcs, lowering, 7 digits • Ink fountain, inking blade and 2 pcs. x drums for mounting the cliché for additional color printing
